1.The crusher can only be put into production after normal operation.

 

2.The materials to be shredded should be evenly added into the crusher cavity, and avoid lateral feeding or full of feeding to avoid unilateral overload or overload.

 

3.During normal operation, the temperature rise of the bearing should not exceed 30°C, and the maximum temperature should not exceed 70°C. When it exceeds the above temperature, it should stop immediately, find out the reason and eliminate it.

 

4.Before stopping, the feeding should be stopped first, and the power can only be turned off after the materials in the crushing chamber are completely discharged.

 

5. When crushing, if the material in the crushing chamber is blocked to stop, immediately turn off the power and stop the operation, and clean the materials in the crushing chamber before starting again.

 

6. After one end of the jaw plate is worn, the adjustable head is used.

 

7. After using the crusher for a period of time, the set bush should be loosened to damage the machine.