1. The weight of the eccentric block: increasing the weight of the eccentric block (increasing the weight of the secondary eccentric block) can increase the amplitude of the ultrasonic vibrating screen. The lower eccentric block controls the upper and lower amplitude of the screen machine.

The left and right amplitude of the screen;

2. The angle of the eccentric block: Adjust the angle of the eccentric block to control the material on the screen. For the specific adjustment angle of the running track on the screen, please refer to the accompanying ultrasonic vibrating screen manual and adjust it according to the characteristics of the material.

The amplitude of the ultrasonic vibrating screen can be adjusted in 3 stages from low to high:
 

1.Low amplitude: It is mainly used for materials with a heavier proportion of materials and materials with good fluidity. It is not necessary to make the materials jump very high;

2.Medium amplitude: It is mainly applied to the screening of a strand of material, which can not only prevent the material from blocking the network but also prevent the material from jumping very high.

3.High amplitude: Mainly because the application has a lighter specific gravity and a very high viscosity on materials such as static electricity to prevent the material from sticking. The high amplitude of the ultrasonic wave will break up the material, which is more beneficial.

Screening of materials.

4.Summary: Some users simply think that the ultrasonic vibrating screen and the binary vibrating screen are similar. This perception is completely wrong. Although the ultrasonic vibrating screen is a line of dual rotary vibrating screen

However, the materials screened by the ultrasonic vibrating screen are mainly high-precision materials. These materials are difficult to screen using general rotary vibrating screens, and ultrasonic vibrating screens are just suitable for such materials.

Sieving.