1. Before the operation, the operator should read the duty record, and conduct the General Inspection of the equipment, the Bolt fastening condition of each component and the screen surface paving condition.

 

2. The starting of rotary vibrating screen should follow the order of process system.

 

3. When working on the rotary vibrating screen, you should check the working conditions of the vibration exciter and sieve box with sight and hearing. After parking, use the hand to contact the bearing cover nearby and check the bearing temperature.

 

4. The stop of rotary vibrating screen should conform to the sequence of process system. Except for special requirements, it is strictly prohibited to continuously feed to the sieve after stopping the machine with materials.

 

5. When handing over, the technical status of the sieve on duty and the faults found should be recorded on duty. The damage category of parts and parts and the date of adding and changing oil of the exciter shall be indicated in the record.

 

6. The rotary vibrating screen should be started before feeding for operation, strictly starting with materials to prevent the motor from bearing load.

 

7. When the operation environment of the sieve machine is poor, such as a large amount of dust, high temperature, etc., the period of replacing lubricating grease should be shortened appropriate