Bucket elevator is suitable for low to high lift, supply material through the shaking table into the hopper after the machine automatic continuous operation upward transport.According to transmission quantity adjustable speed, on-demand select hoisting height, hopper for design and manufacturing, PP non-toxic hopper type make the bucket elevator is more widely used, all dimensions are designed and manufactured according to actual needs, to form a complete set of vertical packaging machine, computer measuring machine design, applied to food, medicine, chemical industrial products, screws, nuts and other products of ascending feeding, through signal identification of the packaging machine to control the machine to stop automatically rev.

 

Bucket elevator type selection reference

 

1. Nature of materials

 

The hopper type should be selected according to the humidity and viscosity of materials. Since the bucket elevator uses gravity to discharge materials, it is not suitable to use the bucket elevator for conveying materials with viscosity, because the materials will stick to the hopper, which will affect the conveying effect.

 

2. Charging method

 

Scoop out type: the hopper is scooped and loaded in the material, used for conveying powder, particles and small pieces of bulk material without grinding or half grinding.

 

Inflow type: the material flows directly into the hopper and is used to transport the material with large blocks and large grinding capacity.

 

3. Discharging method

 

Gravity unloading: Gravity is greater than centrifugal force, material will move along the inner wall of the bucket.

Suitable for small and dense materials.

 

Centrifugal unloading: the centrifugal force value is much higher than the gravity value. The material in the hopper moves along the outer edge of the hopper and is thrown out from the outer edge. It is suitable for dry, powdery, granular and small materials with better fluidity.

 

Mixed unloading: there is little difference between centrifugal force value and gravity value, and the material is discharged from the entire material surface in the hopper. The unloading characteristic is between centrifugal type and gravity type, which is suitable for conveying moist powder and granular materials with poor fluidity.

 

Four, the size of the conveyor

 

Unit throughput is the number we care about, and the throughput directly determines the size of bucket elevator model, motor power and other factors.

 

Bucket elevator selection points to note

 

Traction components: according to the material temperature, humidity, viscosity, particle size, loose density, polish and choose plate chain, ring chain, belt type.

 

Total height of equipment: according to the customer's actual homosexual love situation and material lifting requirements to determine the lifting height, and then determine its total height (the total height is the material lifting height plus the height of the head and base).

 

Driving device: Y series motor + reducer with backstop (motor power over 18.5KW, hydraulic coupler is required).

 

Bucket speed: high temperature material, abrasive material bucket speed < 0.3m/s, adhesive material bucket speed is 0.5~1.2m/s.

 

Bucket capacity: the horizontal bucket capacity is used to calculate. Generally, 0.75%~0.85% of the horizontal bucket capacity is used to calculate the lifting capacity.